OCR Posting Board

Posting for OCR customers only. If you would like to post a listing email the webmaster with your request.

Posted by James

18” single wheel flat lap with 6 magnetic diamond laps, complete for $2500.00. 36” Upright wetbelt sander, older unit but still very functionable. Includes wet stone on the other side and a big box of belts, $500.00. Good size, inside dimensions 24”X29”X36” natural gas doubledoor annealer with double pickup shelves and doors on the bottom, includes all shelves and kiln furniture, cost about 12K new, asking $3000.00. All prices are FOB San Diego. Make offer on all three. Contact james@stoneandglass.com or 760-294-7447.

Posted by Leigh

Annealer For Sale - Denver, CO
Paragon PAF10-1 (35.5" x 29" x 27"). Annealer is 8 years old with Orton computer that was replaced 1 year ago. Includes stand and interior shelf. $6700 - Call Leigh 512-731-1702

Posted by Hammerton

The position of Hot Shop Glass Blower is located within the Hot Glass Works Shop and reports directly to the Glass Production Manager.

MUST BE ABLE TO LIFT 75-100 LBS.

General Purpose

Set up your work area, produce high quality glass products to company specifications in a manner ensuring maximum safety, efficiency and conformance to engineering specifications. Notify manager and coordinate with glass team on any inconsistencies.

Primary Responsibilities

Safely operate all Hot Shop equipment including but not limited to:

  • Crucibles/Furnaces
  • Glory Holes
  • Blow pipes
  • Molds
  • Ovens
  • Arrive to work on time in accordance with the Hot Shop work schedule (which consists of being in the shop and ready to begin blowing glass at 7:00am and immediately following lunch breaks and begin work to ensure maximum productivity.
  • Adhere to work place schedules for meals and breaks.
  • Report any illnesses to your manager and HR to prevent the spread of communicable diseases to other team members.
  • Follow best practices for the production of each type of glass fixture being produced.
  • Communicate ideas and suggestions for improved processes and methods with other team members.
  • Notify Production Manager if supply levels are in need of replenishment.
  • Order needed materials as needed.
  • Ensure all glass items produced adhere to pre-determined quality guidelines for each piece produced.
  • Verify against control standards and with other team members as needed.

Job Qualifications

  • Knowledge of Hot Shop procedures.
  • Demonstrable skills in:
  • Glass blowing
  • Use and maintenance of Furnaces and ovens
  • Use of blow pipes
  • Use of glass molds
  • Use of torches
  • Use of basic hand tools
  • Diploma/GED
  • 3-5 Years experience in a Hot Shop setting with demonstrable knowledge of equipment and practices.
  • Production experience a plus, but not a requirement
  • Willing to locate to the Salt Lake City, Utah area-Relocation assistance available

Benefits include: Access to Hot and Cold Glass Shop, Medical, Dental, Vision, 401K, Basic Life, Voluntary Life, and Disability.

About Hammerton

Hammerton is seeking a Glass Blowing Production Assistant to join our fast-growing glass team. As a leading designer and manufacturer of custom decorative lighting, we're always innovating. While the company’s heritage is in metal fabrication, we've discovered that combining our metalwork with glass capabilities opens up a whole new world of design opportunity. This unique skill set has become a tremendous growth engine for the company. Our Glass Department works in both hot and warm glass, and plays a significant role in the company’s manufacturing process.

Job Type: Full-time

Posted by Kelly

Work in a fast paced creative environment. You will welcome customers and assist glassblowers with equipment and materials. Seeking friendly, outgoing team-player with strong multi-tasking and organizational abilities. Duties will include cleaning, shop maintenance and customer service. Must be able to discern colors, work around high heat, have legible handwriting and lift 50 pounds. Full time position starting asap. Starts at $13 hour/(depending on skills).
To apply please send your resume to voltagallery@gmail.com
To learn more go to JenniferSearsGlassArt.com
lincolncityglasscenter.com

Posted by Stan

O'Neils Art Glass on Camano Island, WA is looking for a part time assistant/gaffer. Located 1 hour north of Seattle, please email to fantaz99@aol.com.

Posted by Randy Scott Harris

1 -300 pound freestanding Italian style pot furnace
1- 30” gloryhole
1- 24” gloryhole
1- 12” gloryhole
1- large top loader kiln with a g5 controller
1- large garage
1- air turbine blower for whole shop
2- bench’s with movable tool table & lean out
1 -2’x4’ marvel
1- 24” diamond flat wheel with all grit size to polish lightly used
1- coldworking lathe with cinterd wheels
1- pipecooler
1- rolling yoke, 1- stationary yoke
1- set of lightly used blocks
2- heat shields
1- small hot torch, 1- medium hot torch, 1- large hot torch
2- Italian weed burners with multiple head sizes
Full set of spiral art pipes every size pipe and punty goblet pipes punties and avolio sticks.
$50k - call 707-601-9612

Posted by Patricia Garibay

Contact info: pgaribay43@gmail.com, (208) 651-4403
Location: Coeur d Alene, ID
$14,000.
Good to Perfect condition. I always kept my tools and equipment in at least Good condition. My studio was built by a local glassblower here in Coeur d Alene who had his own Hot Shop.
Email, text me for pictures & more info. Can possibly help transport to CAN., WA., CA., OR. area.
My studio is single phase, furnace uses 150 amps-110 volts after the transformer. So you need 100 amp-220 breaker.
1. Hot Air Evacuation Hood with Ventilation System 9'W X 46"D X 10'H.
2. Annealer, Inside Dimensions 3'D X 3'W X 10"H. 2 Door, Top Loading, counter balance, Controller.
3. Gas Pipe & safety Valve
4. Glory Hole, Inside Dimensions 23"D X 16"W. 6" Split hole open Door & 12" Split Opening on Face. Had the time so I had it rebuilt.
5. Electric Furnace 80-130lb. Crucible, Transformer, Rectifier, Thermocouple, Controller & Elements. Has 5 Moly Elements.
6. Work Bench 38"W X 36"D. Approx. 20"H (adjustable) also with tool table.
7. Pipe/ Punty warmer & 2 Adjustable yokes.
8. 15-50lb. bags Spruce Pine Nugget's.

Posted by Kyle

Annealer and Garage in Portland, OR. I want to clear some space in my studio so I am selling some equipment I am not using. As is. You haul. Email glassbykyle@gmail.com for pictures and more info.
Annealer
Internal: 41"Wx21"Dx26"H $2,000. There is no controller, just the annealer. There is some sagging in the fiber, but everything closes up OK.
Garage
External: 46"Wx19"x19" $300. I think some mice were living in it for a bit. I vacuumed it out, but the burner needs cleaning.

Posted by Jennifer Sears Glass Art Studio

Front Desk Studio Assistant position available. Work in a fast paced creative environment. You will welcome customers and assist glassblowers with equipment and materials. Seeking friendly, outgoing team-player with strong multi-tasking and organizational abilities. Duties will include cleaning, shop maintenance and customer service. Must be able to discern colors, work around high heat, have legible handwriting and lift 50 pounds. Full time position starting asap. Starts at $13 hour/(depending on skills).
To apply please send your resume to voltagallery@gmail.com
To learn more about us go to JenniferSearsGlassArt.com

Posted by Callahan's Firehouse

Part time glass blowers wanted one-two days a week at www.callahansfirehouse.com. In Langley, Washington. South Whidbey Island.
15-25$ per hour. Call 360-341-1242 or email Calllahanglass@gmail.com

Posted by Nancy Blair

Job Opportunities at YZ Creative Art Center, Shanxi, China:
Hotshop Gaffers Wanted:
YZ Creative Art Center in Shanxi Province, China is seeking applicants for the position of hotshop gaffer for 2018-2020 programs. We are a dynamic glass center, with a museum store, public viewing amphitheater and gallery exhibition space. Applicants must have at least five years’ experience working in a hotshop with strong problem solving skills and techniques at the bench. Ability to interact and communicate effectively with other team members to coordinate the production and completion of a variety of glass projects working closely with diverse international artists in residence is a must. Applicants are expected to participate in community education programs as well as create their own work for exhibition. Must have a strong work ethic with ability to adapt to changing project requirements and deadlines. 2018 contract dates: July 1 to Dec.14.
Hot Shop And Fusing Shop Technicians Wanted:
Hotshop Technician & Fusing Technician Wanted. YZ Creative Art Center in Shanxi Province, China is seeking applicants for the positions of hotshop technician and fusing technician. We are a dynamic glass center, with a museum store, public viewing amphitheater and gallery exhibition space. Applicants must have at least five years’ experience with extensive knowledge of equipment maintenance and operation, ordering supplies, overseeing inventory, coordinating training programs for technician assistants. Ability to interact and communicate effectively with other team members and with diverse international artists is a must. Applicants are expected to participate in community education programs as well as create their own work for exhibition. Must have a strong work ethic with ability to adapt to changing project requirements and deadlines. 2018 contract dates: July 1 to Dec.14.
Coldshop Tech Wanted:
Coldshop Technician/Coordinator Wanted. YZ Creative Art Center in Shanxi Province, China is seeking applicants for the position of coldshop technician. We are a dynamic glass center, with a museum store, public viewing amphitheater and gallery exhibition space. Applicants must have at least five years’ experience working in a coldshop with extensive knowledge of equipment maintenance, operation, ordering supplies, overseeing inventory and coordinating the completion of glass art projects. Ability to interact and communicate effectively with other team members and with diverse international artists is a must. Applicants are expected to participate in community education programs as well as create their own work for exhibition. Must have a strong work ethic with ability to adapt to changing project requirements and deadlines. 2018 contract dates: May 1 to Dec. 1.
Artist Residency Opportunities
Artist Residency Program: YZ Creative Art Center in Shanxi Province, China is accepting applicants for its 2018-2020 residency program. 2018 program is July 1 to Dec 1. The 2019 & 2020 residencies are April 1 to Dec. 1. Our program welcomes passionate, focused and self-motivated artists with at least five years’ experience in their chosen field including the following: hot glass and warm glass (fusing), large installation and site specific art. Our goal is the meaningful exchange of creative ideas between artists the world over and our community at Yun Zhu Lake. During the “Project Based” residency, artists will have an opportunity to design and complete art for specific sites both for interior and exterior locations on Yun Zhu Lake Resort. Ability to interact with diverse international artists in other workshops is a must. Resident artists are expected to welcome Chinese dignitaries, instructors, students and the public into their studios and participate in community education programs. Exhibition opportunities are available. Applicants must have a strong work ethic with ability to adapt to changing project requirements and deadlines. The length of the residency varies with a minimum term of two months and a maximum term of six months (or other arranged time). YZ pays all travel expenses, visa costs, room, 3 meals a day and a weekly stipend. Sightseeing tours to local areas can be arranged.
For Application Email Nancy Blair: nblairyz@aol.com 321-223-3928 (Florida)

Posted by Terje

Fully Equipped Glass Blowing Studio For Rent In South Miami.
Contact Tlundaas@aol.com for more information.

Posted by Pinzette Glassworks

Looking for buyer take over the month to month rent for the space. The studio is located at 2547 8th St. #17, Berkeley, CA 94710. If the buyer would like to take over the space they would jump to the head of the line for spaces in the building to rent. The property manager said she has a wait list longer than her arm. The buyer would have to contact Judy Seidin at the Sawtooth Building and pass a credit check. There are two scheduled and well advertised sales each year. “Open Studios” sale during the holidays and the “East Bay Open Studios” sale happening this weekend. More info: http://sawtoothbuilding.com and contact Bill at billburch1@comcast.net (510) 333-2246

Posted by Bullseye Glass Co.

Bullseye Glass Co., based in Portland, Oregon promotes glass art worldwide through quality production of colored glass for art and architecture, research and education, and the presentation of innovative glass art in its Portland gallery – aka “projects.”
In addition to manufacturing colored sheet glass, frit, rod and stringer, we also blow glass to create fractures (aka: “frac”) for use in raw sheet and kiln formed glass processes. Ideal candidate should have 2 years’ glass blowing experience, ability to work independently and with others.
This position can be a full-time, 3-month contract/freelance position or possibly a regular full-time position. We are flexible! Please email resume including wage history and “Frac” on the Subject line. Check us out at: www.bullseyeglass.com. Email resumes to: hr@bullseyeglass.com.

Posted by Nolan

Glass studio for sale in River Falls, WI
270 lb glass furnace, electric with molly elements, similar to a Steve stableman design, fairly new crucible. Small 10" glory hole with pneumatic door/ with pipe warmer coming of the back. Medium 15-16" glory hole with pneumatic door. Larger glory hole, 30" x5' deep glory hole wth 3 sets of manual doors. One up right annealer 30"x30"x 40"tall. One chest annealer, 3'x3'x2' deep both annealer are hooked up to a gb5 controller. Two belt glass sanders, one is for parts, and way to many belts. Color pick up furnace. 2 benches. 3'x6'x1/2" thick marvering table cold rolled steel. Some optic molds, blow pipes, color- powder and rod, 1000lb of system 96 glass nuggets. $50,000.00 for everything. More photos available. Nolanking@comcast.net 651-271-9723

Posted by Virgil Jones

Available in Asheville, NC. Complete blowing studio (minus the facility), PLUS 28 years of blowing, lampworking, & casting - tools, equip., & supplies! To see a PDF list and pictures and for more info contact Virgil Jones: (828) 284-2163, virgil@virgilsartglass.com. Everything for $19,500.00 - O.B.O.

Posted by Glassometry Studios

Glassworking Equipment and Tools For Sale:
Professional Equipment available for sale Includes 400lb Moly Furnace. Upgrades and regular maintenance performed on furnace since the original build and performs amazingly. Click here to view entire listing.

Posted by Museum of Glass Tacoma

HSH Assistant Instructor Job Posting
HSH Lead Instructor Job Posting

Contact Jennifer Mager – jmager@museumofglass.org

Posted by Bradley at Hammerton

Glass Assistant: There are still few of us left in the United States. We design and manufacture all of our products right here, in Salt Lake City, and not overseas. What's even more unique about Hammerton, is that we build and make most everything by hand. Our Glass department plays a significant role in the manufacturing process. We are completing construction of a new Hot Shop in August, so it's a perfect time to find that individual who is artistic, dedicated, and wants to hone their craft working on our team. The position will be focusing on Cold and Warm Glass Works. Other areas include sandblasting, drilling, and cutting of glass. You'll be making awesome lens materials for our lighting fixtures. This is steady, ongoing work with room for growth and creativity. Only the best will be selected! Qualifications: -Experience is a must in working in both Warm and Cold Glass Works. Must have taken at least one art glass class, and ideally will have had 1 to 2 years of hands-on work. However, talent will trump the years if the candidate can show examples of their work. - Definitely open to someone with leaded or stained glass experience as well. Additional Information: Please send your resume' and images of your work to: careers@hammerton.com. Pay is commensurate with experience and talent.

Posted by Jaime

Complete National torch kit model 3a-b. Used once tanks included $400 obo.
Call: 503-810-7961.

Posted by Chris

Hot Shop Rental Santa Cruz, California. Artist studio for rental- Hot Shop, full Coldworking, Fabrication Blacksmithing, limited metal forming and machining as well. The hot shop has an 80# pot running Spectrum Nuggets, 2 large annealers are available 3 glory holes 8", 10" and 15" and a small garage. Coldworking has 14" saw, 18" diamond lap, 20"grit lap, wet sander, diamond lathe, Cerium wheel, wet sander, core drill, water fed 4" hand grinder and other tooling. Check website for details. Chrisjohnsonglass.com, Chris@Chrisjohnsonglass.com, 510-910-7342.

Posted by Rojer Yvan Serpas

Size (M) jacks by cutting edge for sale. like new condition very little use, and also cutting edge parrot trim shears. I have other jacks i use for most my work and am looking to buy cup jacks. looking to sale jacks for 250 i paid 320 for them, 120 for shears paid 170. or trade for cup jacks. Email rojerserpas@gmail.com

Posted by Rojer Yvan Serpas

Size (M) jacks by cutting edge for sale. like new condition very little use, and also cutting edge parrot trim shears. I have other jacks i use for most my work and am looking to buy cup jacks. looking to sale jacks for 250 i paid 320 for them, 120 for shears paid 170. or trade for cup jacks. Email rojerserpas@gmail.com

Posted by Jack Pine Studio

Jack Pine Studio is a small art glass studio located in Columbus, OH that specializes in pumpkins, hummingbird feeders, and beautiful one of a kind vases and bowls. We are looking for a full time Glassblower to join our team. Must have at least a one year experience working in a production studio. If hired you may be asked to submit a drug test as well as a back ground check. You will be on a 60-90 day probational period. During that time you will be paid hourly wages between $10-$16 per hour pending on your skills. Then you will be paid a base hourly plus piece rate that can go up to $20-30 an hour (pending on skill and performance). You would be asked to sign a "no compete" clause as well. This is an exciti ng opportunity to get in on the ground floor of an up and coming art studio. Send in a brief resume along with several references, a small sampling of your work, a pic of yourself and a brief reason as to why you believe you would be the perfect candidate too: jackpinestudio@gmail.com.

Posted by John de Wit

For sale : Glass equipment. Located on south Whidbey Island Make appt. to view. 1.) Front loading annealler (used for glass blowing) Outside dem.. 64” w x 3’ d x 3’ h Floor 3’ from floor Steel frame, walk in cooler door handles, piano hinges Interior demensions: 55” w x 29’ d x 27” h 60/70 mercury relay Watlow programmable computer series 961 temp controller $800.
2.) Clam Shell fusing Kiln interior usable working space demensions: 45” wide x 38” Deep x 8” high, 70 amp mercury relay with Watlow programmable series 961 temp controller, counter weighted door, Glas ceram fusing shelf, Industrial quality - $4500. 3.) New La Clede Christy fomlac GC 98 Crucible (theoretical capacity #350), use for clear glass 27”w x 17”deep - $950.
Contact John de Wit @ blackdog@whidbey.com for more information.

Posted by Rosenberg Residency at Salem State University

Come and spend the month of July in Salem Massachusetts at Salem State University blowing glass with 3 other artists. The Rosenberg Residency is a four week residency held annually in July. Four artists will be selected to spend the month working on their own creations at our well-equipped studio. The accepted Artists will assist each other daily, working in teams to realize their individual artistic goals. Housing and a meals allowance are included. This is a great opportunity to develop your work and skills in a long form residency with three other artists!
The Rosenberg residency is in its 4th year, and we are excited to spread the word to as many potential applicants as possible. We have a limited budget (what glass studio doesn’t) so please forward information about our program to whomever you think may be interested. Some of our previous residents include: Chris Watts, Dawson Kellogg, Tyler Kimball, Danny White, Joe Ivacic, Miles Van Rensellear, James Labold, Grant Garmezy, Kit Paulson, Sarah Michalik, and DJ Benyosef. Our residents have exhibited, taught, and studied worldwide. Apply today.
http://www.salemstate.edu/glass_studio/
Please feel free to contact me if you have any questions or require more information!
Jeffrey Mentuck, Glass Studio Coordinator, Salem State University, www.facebook.com/salemstateglassworks, jmentuck@salemstate.edu 978 542-7367

Posted by Lincoln City Glass Center

Studio Technician/Production glass blower Lincoln City Glass Center on the Oregon Coast seeks a part-time glass studio technician to maintain the hot glass studio equipment and space. The fast paced studio environment offers blow your own experiences to the public and the technician will interface with studio managers to maintain daily studio upkeep and facilitate long term projects. Additional hours may be added to the schedule for the part-time technition to assist with production and/or classes. A limited number of evening hot shop hours are available to the technician to produce their own work.
The ideal candidate will have previous experience with studio maintenance, while bringing a positive atitude to the team environment. Technical skills will include experience in welding and metal work, wood-working, masonry and refractory experince with high temperature refractory castables, bricks and fiber to maintain glory holes, furnaces, annealers, pipe warmers and coolers. Among the regular duties will be coordinating and carrying out maintainance with management , daily studio light-up, scheduling and leading clean-ups, oversight and studio organization.
Those interested in being considered are requested to send:

  • letter of interest describing qualifications and previous experience in studio maintenance, and production or teaching if applicable (in word or .pdf file format)
  • resume including names and contact information for three references (in word or .pdf file format)
  • 10 images of personal work (in .pdf file format)
Please email your application packet to voltagallery@gmail.com and khglass@gmail.com to the attention of Kelly Howard. Please mail before November 30, 2015. Review will take place shortly after and successful candidates will be contacted for interviews in the following weeks.

Posted by Glassybaby

Glassybaby is currently hiring experienced glassblowers in Berkeley, CA. 5+ years experience preferred. We need people who can make a nice overlay in one heat, blow mold, and trim fast and clean. We want people who:

  1. 1. Are helpful, conscientious, flexible, aware of and able to work at the pace determined by the glass blowing teams.
  2. 2. Can produce high-quality products efficiently, on time, and safely.
  3. 3. Are punctual to work and attentive to the schedule.
  4. 4. Are self-directed and attentive to detail.
  5. 5. Can maintain a clean, safe, work environment.
  6. 6. Are able to take constructive criticism humbly.

This is a fast paced high production environment. We offer a flexible schedule and pay averages between $25-$40/hr depending on position and productivity.

You can contact David Levi through email dlevi@glassybaby.com to set up an interview.

Posted by Garcia Art Glass

Glass blowing studio undergoing unprecedented growth and expansion is seeking the right individuals to join our glass blowing family. Glass Blowing Studio specializing in production of custom high end glass and fabrication of commissioned large scale projects is hiring an experienced and professional full time glass blower. This is a 40+ hr. a week position with health benefits reviewed after one year contract. Qualified applicant must have a minimum of 8 years full time production glass blowing experience. Glass factory workers are encouraged to apply.

  • Must be consistent and accurate with production.
  • Must be willing to take orders from women and production leadership.
  • Must exhibit humility, bring ideas to the table and assimilate easily into our team.
  • Must be willing to take any task including weekly cleaning and maintenance of studio.
  • Must have knowledge of maintenance and repair of all studio equipment to include equipment building and re-building.
  • Must be presentable for studio demonstrations.
  • Must be drug free and open to random drug testing.
  • Must be punctual, self-motivated, trustworthy, reliable and respectful of the working environment and the team.
  • A positive can do attitude is a definite requirement.
  • Must be a problem solver and creative thinker.
  • Welding knowledge is a plus
  • Must have a calm and energetic disposition and ability to put personal problems aside.

Minimum 2 references and working interview required. Competitive compensation depends on experience. Please send resumes to info@garciaartglass.com. No phone calls please. Mail address: 715 S. Alamo & 123 Losoya, San Antonio, Tx. 78205, T. 210-354-4681 F. 210-354-4688. www.garciaartglass.com

Posted by Heather

Glass Instructors and Assistants wanted! The Redmond School of Glass (Redmond, WA) is under new ownership, and looking to expand! We are looking for part time employees who are excited about sharing their art with others.
We are in need of:
- Part time glass instructors who have a passion for teaching others. Classes will range from beginner mini sessions to advanced instruction. Also interested in specialty skills to provide specialty workshops. - Assistants with some level of experience in glass blowing, who can work with our instructors during classes, and work with artists during creation.
Team members need to work well with others and with the general public. Our studio and gallery is a family establishment- with extensive outreach in the community- and are hoping to add others who are interested in the same atmosphere. Email us for more information at info@redmondschoolofglass.com

Posted by John Pomp

Experienced Bubble Starter Wanted For Glassblowing Studio - Full Time
- Hand crafted furniture and lighting company looking for experienced bubble starter
- help organize and maintain glass blowing facility
- full time position, health benefits after 1 year
- position available immediately
- may lead to part time gaffing position
*Qualified applicants must have*
- at least 5 years total glass blowing experience, 2 years minimum full time production experience out side of school and 2 references required.
- must be able lift 50 lb
- detail oriented team player, must take direction well and have a willingness and eagerness to learn
- consistency and accuracy a must, strong work ethic, creative problem solver
- furnace glassblowing required - no lamp work
- rigorous professional studio - must be accustomed to professional glass blowing environment
- must be enthusiastic, reliable, self motivated and responsible
- equipment building/ rebuilding a plus
- must have a desire to blow glass every second of the day
- working interview required
- please email resumes and portfolios to - positions@johnpomp.com
- compensation - commensurate with experience

Glass Blowing Assistant Wanted - Full Time
- Hand crafted furniture and lighting company looking for experienced glass blowing assistant
- help organize and maintain glass blowing facility
- full time position, health benefits after 1 year
- position available immediately
*Qualified applicants must have*
- at least 3 years total glass blowing experience, 1 years minimum full time production experience out side of school and 2 references required.
- must be able lift 50 lb
- detail oriented team player, must take direction well and have a willingness and eagerness to learn
- consistency and accuracy a must, strong work ethic, creative problem solver
- furnace glassblowing required - no lamp work
- rigorous professional studio - must be accustomed to professional glass blowing environment
- must be enthusiastic, reliable, self motivated and responsible
- equipment building/ rebuilding a plus
- must have a desire to blow glass every second of the day
- working interview required
- please email resumes and portfolios to - positions@johnpomp.com
- compensation - commensurate with experience

Posted by Julie Corradetti

Glassblower / all around shop assistant wanted in Baltimore, MD to start end of Sept. 2012. Full time Fall / Winter / Spring, flexible Summers. 5 yrs experience in furnace glassblowing required (no lamp working). Must be able to assist with blown feet, wraps, bits, color pick-ups, also teach beginner/intermediate classes. Assist in creating artwork & limited production pieces. Equipment building & repair skills also needed. Email studio@corradetti.com with portfolio & to arrange an interview.

Posted by April Hilton

Brand new Denver Glass Machinery Deep Kiln KL-27D, 220V, 28 amp., 21" X 21" X 12" single phase. $2,100 value, want $1,800 OBO.
Denver Glass Machinery custom front load annealer, 24" X 24" X 36". 12 cu ft. 220 volt, 42 amp. $5,200 value, want $4,700 OBO.
Over bought equipment for studio, looking to sell to buy other needed equipment. shipping extra. located Granby Colorado. April Hilton. Email - glass@rkymtnhi.com

Posted by Steve Cothern

Denver Top Element Kiln
In need of work, elements in good shape, new hinge for door needed, will need control interface. Comes with full set of quartz element tube protectors, stand in good shape, full set of wheels, springs for lid come with, good start for a project kiln. Suggested Asking Price- $750.00.

Contact: Steve Cothern at 419-254-5771, ext 7853 or scothern@toledomuseum.org.

Posted by Brian Brenno

Medium Glory Hole, Seattle area 43" deep, 30" inside diameter, 23" first opening, 17" 1st door, 12" 2nd door, 8" 3rd door Extra set of doors with burner assembly, Eclipse zero governor, Eclipse proportional mixer, two Spiral Arts burners. $3000.00 obo. Call 206-567-5423 for more info.

Posted by Barbara

I am looking for a permanent part time studio assistant for my studio in Mukilteo, WA. One to two days a week working in the hotshop assisting me as well as a variety of packing, cleaning and miscellaneous tasks. My current assistant is moving out of state in September so I would like to find someone to start in august for training. Pay is DOE. Must be reliable, honest & enthusiastic. Check out my website: www.glassgardensnw.com and contact me at: barbara@glassgardensnw.com.

Posted by Eric Groff

FOR SALE : Unused Pastorale carrier and rotating stand for sale . The carrier is about 60" long and the business end is 11" X 5" and it is made from 3/4" solid steel . The rotating stand is 3/4" solid steel as well and is 10" long and the opening for the carrier tool is 6". Brand new never used $195 plus shipping and insurance from zip code 17508, email: groff@ptd.net

Posted by Guillermo Villalonga

Fine Art Lamps, a premier U.S. manufacturer of over 1000 distinctive and prestigious handmade decorative lighting designs for interior and exterior applications is seeking to fill new positions in their glassblowing facility in South Florida. Marketed in 63 countries, Fine Art Lamps are displayed in company showrooms and in leading furniture showrooms around the world. Looking for Production Coordinator and Production Glassblowers.

Download the Detailed Description here. Requires Microsoft Word.

For more information, visit www.fineartlamps.com or submit your resume to FALresumes@fineartlamps.com.

Posted by Rebecca Iverson

Looking for a small (14" or so) used glory hole and other tools and equipment. Please email ivyglss@msn.com.

Posted by Christian Thirion

East coast studio for sale. No furnace, but includes:
Large Annealler 48”L x 34”D x 37”H
Glory Hole 30” x 23” inside 26” x 16” barn doors opening 14”
Glory Hole 36” x 30” inside 32” x 22” barn doors opening 19”
2 Benches
2 Marver Tables - 36” x 30”
30” x 16”
Air Turbine and more - please call Christian Thirion @
607-738-3053 or email verre93@aol.com.

Posted by Debra Noah

Setting up a hot shop in Central Washington this summer. Looking for reasonably priced equipment. Do you have experience with hot shop set up (from scratch)? I could use your help. 509-246-6010 yogicowgirl@gmail.com

Posted by Kyle Gribskov

For Sale: 300lb Moly Furnace with extra elements and crucible, 28" diam glory hole, 2 side load annealers, pipes and punties, 36" carborundum lap wheel and a 24" diamond lap wheel.
All in good working condition, prices negotiable within reason.
Kyle Gribskov 360-795-8419

Posted by Goggleworks Hot Glass Studio and School

Our state of the art glass facilities are perfect for glassblowing, hot casting, coldworking, fusing, kiln casting, flameworking and stained glass. The hot glass studio is 3,000sq./ft. and includes 4 benches and g-holes (Ranging from 16”-24”), 2 furnaces each holding 500lbs. each, plenty of annealing space, pipes/punties, tools, color ovens, lg. garage, and a small coldworking area. The warm/ cold studio is 2,000sq/ft and includes full coldshop, 3 casting kilns, 2 lg fusing kilns, and a lampworking studio. Hot shop rates are $40/hr ($990 for 30hr block). Visit us on line www.goggleworks.org. Contact Director of Studio Activities- Nate Dubbs, ndubbs@goggleworks.org, or at 484-335-0045 for more details.

Posted by Gary Levi

My name is Gary Levi. I own INTAGLIO DESIGNS, LTD, formerly LEVAY GLASS. I am selling or leasing my glass studio in Alton, IL. Barring that, I would like to find someone with experience for a Joint Venture in which that person will manage the glass studio (Hire, Fire, Market) as an adjunct to my Glass Museum, in the same building. Any assistance would be appreciated. Call 618-670-6707

Special Orders

DON'T SEE THE TOOL OR COLORS YOU NEED? CONTACT US
 

Fast Shipping

GUARANTEED 48-HR SHIPPING MON-FRI (BACKORDERS NOT INCLUDED)
 

800 445 7742

8AM-5PM MON-FRI